Apple’s AirPods “just work” with iPhones thanks to their W1 chip, but they’re also standard Bluetooth headphones. That means they work with any device that supports Bluetooth audio – even Android phones.
The pairing process won’t be as effortless as pairing with an iPhone, and the connection may not be quite as stable, but they’ll work with anything from an Android phone or Windows PC to other Apple devices like an Apple TV. There’s also an easy pairing process if you’re using a Mac or iPad.
How to Pair AirPods With a Mac or iPad
If you’ve already paired AirPods with your iPhone, this pairing status will sync between your iPhone and any iPads and Macs you have on your account thanks to iCloud. For this to work, you have to be signed into the iPad or Mac with the same Apple ID you use on your iPhone. For Macs, you must have Handoff enabled.
Older Macs that don’t support Handoff can’t take advantage of this easy pairing process, and you’ll have to manually pair it with them using Bluetooth. This pairing status also doesn’t sync with Apple TVs, so you’ll have to use Bluetooth to pair AirPods with an Apple TV, too.
If everything is set up properly, you can simply select your AirPods like any other audio device from your iPad or Mac. First, ensure either your AirPods case is open, the AirPods are out of the case, or that they’re in your ears. If they’re in the case and the case is closed, they won’t be available as an audio device option.
On an iPad, open the Control Center, tap the audio wave icon at the top right corner of the music controls or long-press the music controls and tap the device switcher icon, and select your AirPods in the list of audio devices.
On a Mac, click the volume icon on your Mac’s menu bar and select your AirPods in the list of available devices or head to Apple menu > System Preferences > Sound and choose the AirPods. You can also enable the volume icon on your Mac’s menu bar from here by checking the “Show volume in menu bar” box if it isn’t already enabled.
How to pair AirPod with Android-phone, Windows computer, Apple TV or other device
To pair your AirPods with any other devic or an older Mac, you’ll just need to find the easy-to-miss pairing button on the AirPods charging case. Look at the back of your AirPods case. See that faint silver circle near the bottom, just above the Lightning port? That’s the “setup button” you need to pair your AirPods with other devices where the W1 chip can’t pair it automatically.
To place your AirPods in pairing mode, here’s what you need to do:
1. Place both your AirPods in the charging case.
2. Open the lid on the case. You’ll see the light come on, indicating the charging status.
3. xPress and hold the circular button on the back of your AirPods case. The light inside the case will begin to blink white. This indicates that your AirPods are in pairing mode.
While the white light is flashing, your AirPods will be “discoverable”. In other words, they’ll appear as a peripheral you can pair from your Bluetooth settings, just like any other Bluetooth headphones or speakers. For example:
· Android: Go to Settings and tap the “Bluetooth” option under Wireless & networks. Ensure Bluetooth is enabled, and you’ll see the AirPods as an available device here.
· Windows 7: Head to Control Panel > Hardware and Sound > Devices and Printers > Add a device. Choose your AirPods.
· Mac: Click the Apple menu and head to System Preferences > Bluetooth. Select your AirPods in the list and click “Pair”.
· Apple TV: Navigate to Settings > Remotes and Devices > Bluetooth. Pick your AirPods on the list.
· Other Devices With Bluetooth: Just navigate to the Bluetooth settings screen where you can view and connect Bluetooth devices. Your AirPods will appear as an option here as any other Bluetooth headphones would.
· Windows 10: It only takes about 3 seconds to pair AirPods with iPhone and other Apple devices. Although pairing AirPods with a Windows 10 PC will require a few extra steps, it won’t take more than 1 minute.
· Pair AirPods with Windows 10 PC for the first time
On your PC, open the Settings app and select Devices from the main menu. At the top of the Bluetooth & other devices page, click Add Bluetooth or other devices. On the Add a device window, click Bluetooth.
Put the AirPods in the box and open the lid. Press and hold the button on the back of the case until you see the status light between the two AirPods begin to blink white, then release your hand. Your AirPods will display in the Add a device window. Click here to pair and connect.
Pair AirPods with a Windows 10 PC
· Reconnect after pairing
After making the initial connection between the PC or laptop and the AirPods, you will be able to reconnect the AirPods and PC to listen to music, watch YouTube, video conference, etc. by returning to the Bluetooth & other devices in Settings. You will see all paired audio devices are listed under Audio heading. Select AirPods from the list and click the Connect button.
Note: Technically, after pairing, AirPods can automatically reconnect to those devices. But most likely, it will connect to your phone or tablet. So, if AirPods don’t connect automatically to a Windows 10 PC, it’s best to make the manual connection again.
If after a while there are no Bluetooth options, your AirPods might leave pairing mode, and you’ll see the white blinking light stop. Just long-press the circular setup button again, and your AirPods will re-enter pairing mode and be discoverable from your other devices once again.
When they are connected, AirPods will act as regular Bluetooth headsets with any device they are paired with.
How to Reconnect your AirPods to your iPhone or iPad
Your AirPods will be disconnected from your iPhone after you pair them with another non-iOS device. You’ll need to reconnect them to your iPhone to use them with your iPhone once again.
To do this, first, place your AirPods back in their case. Head to your iPhone’s home screen, open the AirPods case and hold it near your iPhone. (This same process works on an iPad, if you want to pair your AirPods with an iPad instead of an iPhone.)
You’ll see a “Not Your AirPods” message appear on your screen. Tap “Connect”. You’ll then be prompted to press and hold the circular button on the back of the case. Release the button when “Connecting” appears on your screen, and they’ll be automatically reconnected to your iPhone.
